 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DM9334 8-Bit Addressable Latch August 1986 Revised July 2001 DM9334 8-Bit Addressable Latch General Description The DM9334 is a high speed 8-bit Addressable Latch designed for general purpose storage applications in digital systems. It is a multifunctional device capable of storing single line data in eight addressable latches, and being a one-of-eight decoder and demultiplexer with active level HIGH outputs. The device also incorporates an active level LOW common clear for resetting all latches, as well as an active level LOW enable. The DM9334 has four modes of operation which are shown in the mode selection table. In the addressable latch mode, data on the data line (D) is written into the addressed latch. The addressed latch will follow the data input with all nonaddressed latches remaining in their previous states. In the memory mode, all latches remain in their previous state and are unaffected by the data or address inputs. In the one-of-eight decoding or demultiplexing mode, the addressed output will follow the state of the D input with all other inputs in the LOW state. In the clear mode all outputs are LOW and unaffected by the address and data inputs. When operating the device as an addressable latch, changing more than one bit of the address could impose a transient wrong address. Therefore, this should only be done while in the memory mode. The function tables summarize the operation of the product. Features s Common clear s Easily expandable s Random (addressable) data entry s Serial to parallel capability s 8 bits of storage/output of each bit available s Active high demultiplexing/decoding capability Ordering Code: Order Number DM9334N Package Number N16E Package Description 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Connection Diagram (c) 2001 Fairchild Semiconductor Corporation DS006609 www.fairchildsemi.com DM9334 Function Tables E L H L H C H H L L Addressable Latch Memory Active HIGH Eight Channel Demultiplexer Clear Mode Inputs C L L L L L * * * L H H H H H * * * H H E H L L L L * * * L H L L L L * * * L L D X L H L H * * * H X L H L H * * * L H H H H X L L H H A0 X L L H H A1 X L L L L * * * H X L L L L * * * H H H H QN-1 QN-1 H X L L L L L QN-1 L H QN-1 QN-1 L A2 X L L L L Q0 L L H L L Q1 L L L L H Present Output States Mode Q2 L L L L L Q3 L L L L L * * * L L L L L H Memory QN-1 QN-1 QN-1 QN-1 QN-1 L H QN-1 QN-1 * * * QN-1 QN-1 L H Addressable Latch Q4 L L L L L Q5 L L L L L Q6 L L L L L Q7 L L L L L Clear Demultiplex H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Condition QN-1 = Previous Output State Logic Diagram www.fairchildsemi.com 2 DM9334 Absolute Maximum Ratings(Note 1) Supply Voltage Input Voltage Operating Free Air Temperature Range Storage Temperature Range 7V 5.5V 0 to +70C Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. -65C to +150C Recommended Operating Conditions Symbol VCC VIH VIL IOH IOL tW tSU Supply Voltage HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Current LOW Level Output Current ENABLE Pulse Width (Figure 1) (Note 3) Setup Time (Note 3) Data 1 (Figure 5) Data 0 (Figure 5) Address (Figure 6) (Note 2) tH TA Hold Time (Note 3) Data 1 (Figure 5) Data 0 (Figure 5) 0 0 0 19 20 20 10 13 13 14 5 ns Parameter Min 4.75 2 0.8 Nom 5 Max 5.25 Units V V V mA mA ns -0.8 16 -10 -13 70 ns Free Air Operating Temperature C Note 2: The ADDRESS setup time is the time before the negative ENABLE transition that the ADDRESS must be stable so that the correct latch is addressed without affecting the other latches. Note 3: TA = 25C and VCC = 5V. Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol VI VOH VOL II IIH Parameter Input Clamp Voltage HIGH Level Output Voltage LOW Level Output Voltage Conditions VCC = Min, II = -12 mA VCC = Min, IOH = Max VIL = Max, VIH = Min VCC = Min, IOL = Max VIH = Min, VIL = Max VCC = Max VI = 2.4V VCC = Max VI = 0.4V VCC = Max (Note 5) VCC = Max 2.4 3.6 0.2 0.4 1 E Input Others E Input Others -30 56 60 40 -2.4 -1.6 -100 86 Min Typ (Note 4) Max -1.5 Units V V V mA A Input Current @ Max Input Voltage VCC = Max, VI = 5.5V HIGH Level Input Current IIL IOS ICC LOW Level Input Current Short Circuit Output Current Supply Current mA mA mA Note 4: All typicals are at VCC = 5V, TA = 25C. Note 5: Not more than one output should be shorted at a time, and the duration should not exceed one second. 3 www.fairchildsemi.com DM9334 Switching Characteristics at VCC = 5V and TA = 25C Symbol tPLH tPHL tPLH tPHL tPLH tPHL tPHL Parameter Propagation Delay Time LOW-to-HIGH Level Output Propagation Delay Time HIGH-to-LOW Level Output Propagation Delay Time LOW-to-HIGH Level Output Propagation Delay Time HIGH-to-LOW Level Output Propagation Delay Time LOW-to-HIGH Level Output Propagation Delay Time HIGH-to-LOW Level Output Propagation Delay Time HIGH-to-LOW Level Output From (Input) To (Output) Enable to Output, (Figure 1) Enable to Output, (Figure 1) Data to Output, (Figure 4) Data to Output, (Figure 4) Address to Output, (Figure 2) Address to Output, (Figure 2) Clear to Output, (Figure 3) RL = 400, CL = 15 pF Min Max 28 27 35 28 35 35 31 ns ns ns ns ns ns ns Units Switching Time Waveforms Other Conditions: C = H, A = Stable Other Conditions: E = L, C = L, D = H FIGURE 1. FIGURE 2. Other Conditions: E = H Other Conditions: E = L, C = H, A = Stable FIGURE 3. FIGURE 4. Other Conditions: C = H Other Conditions: C = H, A = Stable Note: The shaded areas indicate when the inputs are permitted to change for predictable output performance. FIGURE 5. FIGURE 6. www.fairchildsemi.com 4 DM9334 8-Bit Addressable Latch Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N16E Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 5 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com |
Price & Availability of DM9334
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |